China Original Factory Air Entraining Type Polycarboxylate Superplasticizer - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Manufacture and Factory

Original Factory Air Entraining Type Polycarboxylate Superplasticizer - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Sand Finish Concrete Retarder, Naphthalene superplasticizer, Retarder for concrete, Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Original Factory Air Entraining Type Polycarboxylate Superplasticizer - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Detail:

Appearance	Colorless to yellowish or brown viscous liquid
Bulk density(kg/m³,20℃)	1.107
Solid content(liquid)(%)	40%，50%，55%
PH value(20degree)	6+/-1
Alkali Content(%)	≤0.0003%
Sodium Sulfate Content	0.04
Water Reducing Rate	≥25%
Air Content	≤2.8%
CL- Content	0.02%

No.	Inspection Items	Unit	Standard Value	Test Results
1	1h After Fluidity of Cement Paste	mm	≥220	240
2	Water Reducing Rate	%	≥30	36
3	Atmospheric Pressure Bleeding Rate	%	≤60	21
4	The Difference Between the Setting Time	min	Initial -90~+120	-90~+120
4	The Difference Between the Setting Time	min	Final -90~+120	-90~+120
5	Slump Variation Retention	30min	≥180	240
5	Slump Variation Retention	60min	≥180	230
6	Ratio of Compressive Strengh	2d	≥130%
		7d	≥125%
		28d	≥120%
7	Effect on Reinforcement Corrosion	/	No Corroding	No Corroding
8	Ratio of Shrinkage	/	≤110	103
Tested by Shanlv P.O.42.5 standard portland cement, with the dosage of 0.35% of CL-ES-50

CL-ES-50 can be widely used in all kinds of precast concrete,prefabricated products,early strength and high early-strength concrete.

1. Recommended dosage ( by binding materials’ weight) is 0.35%-0.55% (on the base of 50% solid content). The optimum dosage is according to the real project conditions and actual materials.

2. Compatibility test should be done in advance when used with other additives.

3. Precise measurement avoids repeat dosage and errors.

Packaging: 200kgs/drum 1000L/IBC tank 23tons/flexitank

Storage: to be stored in plastic or stainless steel container,please store dry at usual ambient temperature and protect from excessive heat(below 40℃)

Shelflife: 1year

Transport regulation: not handle with care to avoide breakage when moving,keep from excessive heat.this product is non-toxic,non-irritating,non-combustible.

Product detail pictures:

Related Product Guide:

It is actually our accountability to satisfy your needs and effectively serve you. Your pleasure is our best reward. We're on the lookout forward for your stop by for joint growth for Original Factory Air Entraining Type Polycarboxylate Superplasticizer - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli , The product will supply to all over the world, such as: Lisbon, Sri Lanka, Jersey, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.

50% Water Reducing Admixture

Astm C494 Admixture

Pc Superplasticizer

Pce

Precast Admixtures

Precast concrete admixture

Pumping Agent

Sulfate Resistant Concrete Admixture

Sulfonated melamine formaldehyde

Superplasticizer Admixture For Concrete

This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.

By Natalie from Mauritius - 2017.06.19 13:51

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Gabrielle from Nicaragua - 2017.09.29 11:19

Write your message here and send it to us