China Hot-selling Polycarboxylic Acid - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Manufacture and Factory

Hot-selling Polycarboxylic Acid - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Pce Mother Liquor, China Sodium Gluconate, Polycarboxylate Admixture, We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won't make you regret!

Hot-selling Polycarboxylic Acid - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Detail:

Appearance	Colorless to yellowish or brown viscous liquid
Bulk density(kg/m³,20℃)	1.107
Solid content(liquid)(%)	40%，50%，55%
PH value(20degree)	6+/-1
Alkali Content(%)	≤0.0003%
Sodium Sulfate Content	0.04
Water Reducing Rate	≥25%
Air Content	≤2.8%
CL- Content	0.02%

No.	Inspection Items	Unit	Standard Value	Test Results
1	1h After Fluidity of Cement Paste	mm	≥220	240
2	Water Reducing Rate	%	≥30	36
3	Atmospheric Pressure Bleeding Rate	%	≤60	21
4	The Difference Between the Setting Time	min	Initial -90~+120	-90~+120
4	The Difference Between the Setting Time	min	Final -90~+120	-90~+120
5	Slump Variation Retention	30min	≥180	240
5	Slump Variation Retention	60min	≥180	230
6	Ratio of Compressive Strengh	2d	≥130%
		7d	≥125%
		28d	≥120%
7	Effect on Reinforcement Corrosion	/	No Corroding	No Corroding
8	Ratio of Shrinkage	/	≤110	103
Tested by Shanlv P.O.42.5 standard portland cement, with the dosage of 0.35% of CL-ES-50

CL-ES-50 can be widely used in all kinds of precast concrete,prefabricated products,early strength and high early-strength concrete.

1. Recommended dosage ( by binding materials’ weight) is 0.35%-0.55% (on the base of 50% solid content). The optimum dosage is according to the real project conditions and actual materials.

2. Compatibility test should be done in advance when used with other additives.

3. Precise measurement avoids repeat dosage and errors.

Packaging: 200kgs/drum 1000L/IBC tank 23tons/flexitank

Storage: to be stored in plastic or stainless steel container,please store dry at usual ambient temperature and protect from excessive heat(below 40℃)

Shelflife: 1year

Transport regulation: not handle with care to avoide breakage when moving,keep from excessive heat.this product is non-toxic,non-irritating,non-combustible.

Product detail pictures:

Related Product Guide:

Our progress depends about the advanced products ,fantastic talents and continuously strengthened technology forces for Hot-selling Polycarboxylic Acid - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli , The product will supply to all over the world, such as: Monaco, Montpellier, Islamabad, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.

50% Slump Retention Admixture