China Reliable Supplier Concrete Plasticiser - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Manufacture and Factory

Reliable Supplier Concrete Plasticiser - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli

Short Description:

CL-SNF-18 is a naphthalene sulfonate formaldehyde condensation compound, easily soluble in water, stable physical and chemical performance, high efficiency, high performance water reducing agent. Has the characteristics of high dispersibility, low foaming ability, high water reducing rate, high early strength, enhance is the adaptability of cement. Added this product greatly increase concrete liquidity, improve the slump, improve the workability and application properties.

Send email to us

Product Detail

Product Tags

Feedback (2)

We always continually offer you the most conscientious purchaser services, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Self Compacting Concrete Admixtures, Pce Based Superplasticizer, 50% Early Strength Admixture, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!

Reliable Supplier Concrete Plasticiser - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli Detail:

Appearance	Colorless to yellowish or brown viscous liquid
Bulk density(kg/m³,20℃)	1.107
Solid content(liquid)(%)	40%，50%，55%
PH value(20degree)	6+/-1
Alkali Content(%)	≤0.0003%
Sodium Sulfate Content	0.04
Water Reducing Rate	≥25%
Air Content	≤2.8%
CL- Content	0.02%

No.	Inspection Items	Unit	Standard Value	Test Results
1	1h After Fluidity of Cement Paste	mm	≥220	240
2	Water Reducing Rate	%	≥30	36
3	Atmospheric Pressure Bleeding Rate	%	≤60	21
4	The Difference Between the Setting Time	min	Initial -90~+120	-90~+120
4	The Difference Between the Setting Time	min	Final -90~+120	-90~+120
5	Slump Variation Retention	30min	≥180	240
5	Slump Variation Retention	60min	≥180	230
6	Ratio of Compressive Strengh	2d	≥130%
		7d	≥125%
		28d	≥120%
7	Effect on Reinforcement Corrosion	/	No Corroding	No Corroding
8	Ratio of Shrinkage	/	≤110	103
Tested by Shanlv P.O.42.5 standard portland cement, with the dosage of 0.35% of CL-ES-50

CL-ES-50 can be widely used in all kinds of precast concrete,prefabricated products,early strength and high early-strength concrete.

1. Recommended dosage ( by binding materials’ weight) is 0.35%-0.55% (on the base of 50% solid content). The optimum dosage is according to the real project conditions and actual materials.

2. Compatibility test should be done in advance when used with other additives.

3. Precise measurement avoids repeat dosage and errors.

Packaging: 200kgs/drum 1000L/IBC tank 23tons/flexitank

Storage: to be stored in plastic or stainless steel container,please store dry at usual ambient temperature and protect from excessive heat(below 40℃)

Shelflife: 1year

Transport regulation: not handle with care to avoide breakage when moving,keep from excessive heat.this product is non-toxic,non-irritating,non-combustible.

Product detail pictures:

Related Product Guide:

Our staff are usually in the spirit of "continuous improvement and excellence", and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer's belief for Reliable Supplier Concrete Plasticiser - CL-ES-50 Polycarboxylate superplasticizer 50%(early strength&water reducing type) – Chengli , The product will supply to all over the world, such as: Australia, Adelaide, Portugal, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.

Concrete Admixture Company